|
|
Support Equipment
| Hydraulic Spreader Box | |
|---|---|
 |
The Hydraulic Spreader Box is designed specifically for
microsurfacing and quick
set slurry seal mixes. Widths
are
hydraulically
adjusted from 8 to 14
feet
(2.4 to 4.3m)
in 6 inch (15cm)
increments. The primary and
secondary
strikeoff heights are
adjustable at three places.
Auger
bearings are polyethylene,
providing
low maintenence and economical replacement. Inside
skids,
produce cleaner
longitudinal
joints. Widths to 16 feet (4.9m) are
available
by special order. Adjustable
pitch rear strikeoff available
(shown). |
| Slurry Seal Spreader Box | |
 |
The Slurry Seal Box
is available with
or
without augers for typical
slow
set slurry seal applications.
The width
is adjustable from
9 to 14 feet
(2.7 to 4.3m)
in 6 inch (15cm)
increments. Widths
to 16 feet (4.9m)
are
available by special order. |
Rut Box |
|
 |
The Rut Box design allows
filling of wheel path
ruts
to the desired level without wasting material. Two V-shaped screeds channel the larger sized aggregate in the mix to the deeper part of the rut. The screeds are independantly adjustable. Available in 5 foot (1.5m) or 6 foot (1.8m) widths. |
Variable Width Spreader Box |
|
 |
Variable spreader Box
is
designed
for microsurfacing.
The width is
adjustable while paving. Hydraulic cylinders within the frame of thespreader box. The ribbon augers are fully expandable, feature a 12" pitch, and are hydraulically driven. Both the primary and secondary strikeoffs feature a patented design that allows them to slide within a guide tube while the box expands or contracts while paving. It also features inboard runners to provide clean longitudinal joints. The Variable Width Spreader Box is available in a 9 to 14 foot (2.7 to 4.3 m) model. |
 Print Page |
|
ITG - Power Transmission and Metal Product Specialists
5375 Avenida Encinas, Carlsbad, CA 92008 - (760)431-3644 / Fax (760)431-8889
© 1984-2008 a Jenkins Enterprises, Inc. Company