Hydraulic
Spreader Box
The Hydraulic Spreader Box is designed specifically for microsurfacing and quick set slurry seal mixes. Widths are hydraulically adjusted from 8 to 14 feet (2.4 to 4.3m) in 6 inch (15cm) increments. The primary and secondary strikeoff heights are adjustable at three places. Auger bearings are polyethylene, providing low maintenence and economical replacement. Inside skids, produce cleaner longitudinal joints. Widths to 16 feet (4.9m) are available by special order. Adjustable pitch rear strikeoff available (shown).

Slurry Seal Box
The Slurry Seal Box is available with or without augers for typical slow set slurry seal applications. The width is adjustable from 9 to 14 feet (2.7 to 4.3m) in 6 inch (15cm) increments. Widths to 16 feet (4.9m) are available by special order.

Rut Box
The Rut Box design allows filling of wheel path ruts to the desired level without wasting material. Two V-shaped screeds channel the larger sized aggregate in the mix to the deeper part of the rut. The screeds are independantly adjustable. Available in 5 foot (1.5m) or 6 foot (1.8m) widths.